SAG and PP-g-MAH can improve combination property of polyester alloys and reinforced PP By improving phase state, such as promote homo-dispersion of dispersed phase, increase thickness of interface layer, decrease interface tension

SAG-008 has good effect on increasing viscosity and chain extension for R-PC, R-PET and R-PA , as well as PLA and PBS As a result, improving the mechanical properties of recycled or degradable materials

Introduction of reactive groups and elastomer in SOG-02,CMG5805 and SBG-001 can effectively improve the impact resistance of PBT,PA and PC+ABS

The epoxy groups in SAG can react with the terminal groups which can cause further degradation of polyester, the terminal groups could come from the origin resins or resins’ degradation caused by heat, shear, water or catalyst in processing

EMI-100 is an excellent carrier for masterbatch used in PC、 PC ABS and ABS，can effectively restrain hard spots and silvers, improve gloss and dyeability

EMI-200 is a kind of SAN can effectively improve flow ability of ABS,ASA,PC ABS,ABS GF, etc, meanwhile, has little influence on impact resistance and heat resistance